Country Flame IWZC-02 User Manual download pdf (Page 20)

DOOR GASKET REPLACEMENT

Remove the doors from the unit. Place the doors, face down on a protective surface to ensure no

marring or scratching occurs during gasket replacement. To replace the Thermoglass™ knitted rope

and tape gasket, first remove all of the old material and gasket cement. Use a putty knife or other

sharp instrument to assist in removal. Use caution to prevent injury when removing old material. It

is important to ensure the area is totally clean before installing the new gasket cement and material.

The gasket must fit tight against the doorframe in order to ensure a proper airtight seal when the stove

is being operated. Apply gasket cement to the gasket channel per instructions provided with the

gasket kit. Once the cement has been properly applied, install the new gasket. Both gasket and

gasket cement are available from your authorized Country Flame dealer. The following table defines

the gasket material used in the Inglenook Fireplace:

Gasket Length Quantity Dimensions

Around glass 4.25 feet each 2 ¾” wide by 1/16” thick tape

Doorframe 5 feet each 2 3/8” rope, high density

Version: 7.0

Ash drawer 30 inches 1 ½” wide by 1/8” thick tape

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 53 54

No comments

Country Flame IWZC-02 User Manual Page 20