Country Flame HR-01 Operations Instructions download pdf (Page 25)

Version 4.0 25

STOVE SPECIFICATIONS

TABLE 2 shows the physical dimensions of the Crossfire product.

CROSSFIRE

DIMENSIONS (IN INCHES)

STOVE HEIGHT (At Front) 22.5“

STOVE DEPTH (From Shroud) 14.0“

STOVE WIDTH (Rear) 26.0“

STOVE WIDTH (At Shroud Mount) 25.5“

STOVE WEIGHT (empty) 220 pounds

SHROUD WIDTH, (standard) 42.0”

SHROUD HEIGHT (standard) 30.0”

SHROUD WIDTH, (oversized) 48.0”

SHROUD HEIGHT (oversized) 32.5”

TABLE 2: CROSSFIRE-FLEX SPECIFICATIONS

ELECTRICAL REQUIREMENTS

The Crossfire Model CF-04 requires a code compliant grounded 120 volt, 15 ampere, and 60 hertz electrical

outlet. The Crossfire utilizes only a fraction of the 15 amperes rating of a code compliant outlet but it is

strongly recommended that a dedicated circuit (versus a branch electrical circuit) be provided for the stove to

ensure no interference from other electrical appliances.

GOLD DOOR CARE

All Crossfire plated doors and trim (gold or nickel) should be wiped down BEFORE THE FIRST FIRE to

prevent potential permanent damage to occur to plating. For general cleaning, use a dry cloth and wipe the

plated surface to ensure the luster and beauty lasts a lifetime. Always use an approved glass cleaner (i.e.

Windex, Glass Plus) and a lint free soft cloth to polish the doorframe. DO NOT use abrasives, like steel

wool, brass polish, or cleaners, like Comet. Improper cleaners can permanently scratch the finish. A

damaged door can be returned to Country Flame for refinishing but repair is expensive. Proper care of the

Crossfire plated door and other plated trim will ensure these parts will survive a lifetime of use. A painted

Crossfire door requires no specific care.

OPTIONAL FEATURES

There is an ever growing list of options for Country Flame stove products, including the Crossfire. Contact

an authorized Country Flame dealer for more information.

OPTIONAL THERMOSTAT OPERATION

A thermostat option is available for the Crossfire.

CROSSFIRE IS COLD

• See start-up procedure.

CROSSFIRE IS HOT

• If the stove is set to a heat setting greater than 1 when the thermostat calls for heat, the Intelli-Choice

Control Board will remember this setting and return to this setting any time heat is called for by the

thermostat.

• If the heat level is equal to 1 when the thermostat calls for heat the Intelli-Choice Control Board will

use this setting whether heat is called for or not.

• The stove will operate at the selected Heat Level until such time as the thermostat stops calling for

heat. The Intelli-Choice Control Board will then return the stove back to heat level 1. The last heat

level programmed by the operator will be remembered by the software for use as the next Thermostat

Heat Level when heat is again called for by the thermostat.

CHANGE HEAT LEVEL (thermostat active)

• When the homeowner changes the control board heat level setting, while the thermostat is active

(calling for heat,) the new setting becomes the new thermostat (call for heat) setting. The stove will

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 53 54

Comments to this Manuals

No comments

Country Flame HR-01 Operations Instructions Page 25

Comments to this Manuals